IMPORTANT WARNING: Although most of the actions described on our site have been tried by our company and are working without any problems, we can not be sure of 100% correctness . It is your responsibility to do so. It is up to you to not do it. If you are not sure about it, you
can send us your request.
SAMSUNG GALAXY A7 2016 (A710F) needs to install software if you want to upgrade your software or if your software is corrupted (collapsed).
Even if the software installation does not harm the information, you should back up your information in case. Because some software is deleted information.
If you do not have information about backing up information, you can find what you are looking for in backing up your information.
Files you need to upload:
After downloading all the files, extract a Winrar file to a folder .
If you can not pass the download mode, you can buy from the Download Hubs in our company if there is a malfunction in your keys.
Turn off your phone. Connect the Download Hub to the usb port of your phone. Wait for 3 seconds
. Remove the hub after your device has gone to download mode .
Switch off your phone . Press and hold the Volume Down (-) key and the middle key while holding down the device power button.
Until Odin mode is written. Release the keys when the device is in Download mode.
Run Odin 3.09 on your computer. Connect your phone to your computer via usb. Wait for the drivers to load.
When the drivers are successfully loaded and the Odin Proton ID: COM box will appear the number of the port you are connecting.
Get your software. You PDA part load . Wait according to the speed of your computer. For 4gb and under, wait for 1 minute and over time to load.
If you get answering warnings, do not close the program. wait, it will take a little longer. The waiting time increases according to the size of the software.
After the software has been processed, press the Start button and do not disconnect your phone-computer connection while uploading. Do not play the cable even if it is possible.
After the software is finished, it will write Reset. After you reset the device, when you write PASS in ID: COM, your device is now installed.